Full Discharge Type Vertical Style Disc Stack HFO Purifier For HFO
LO DO Separation
Descripition:
The series separator is mainly applied in the purification and
clarification of the diesel, light fuel oil, heavy fuel oil and
other mineral oil, to
remove the water, moisture, mechanical impurities and some harmful
substances of the oil. This model is automatic slag type, high
separation
efficiency, no need to disassemble to slag. It can be automatic
controlled according to requirement which greatly reduce the labor
intensity of the
operating. This machine by the accurate calibration balancing,
little vibration, can be long-running and operated safety and
reliable.
The clear oil and dirty water are pumped out by centripetal pump,
the sludge is discharged automatically and fully.
The machine is one kind of rotary machine with high speed, After
accurate dynamic balancing, it can run for long time with low
vibration, safety
and security. The design, product and acceptance are conformed to the standard of
GB/T5745 “Marine Disc Separator”.
The separator KYDR203CD-23 is mainly used for fuel oil (light fuel)
and lubricants clarification or purification treatment,
suitable for the occasion of the ship and power plant and similar
materials. for KYDR203, it's the smaller model, if you want to make
test or
capacity is smaller, you can choose this types.
Our waste oil separators are used in inland rivers, offshore and
ocean shipping have achieved ISO and CCS approval certificate,
and the products used in fishing boats also passed the fishery
inspection. we have exported to the Mauritius which is used to
separate the waste
oil in ship.
Structure:
Separator is mainly composed by the drive mechanism (horizontal
shaft and vertical shaft), drum rack, speed measurement equipment,
brakes,
motor and etc.
Our advantages:
1, the PLC adopts Siemens Touch Screen control box
2, can achieve the self cleaning
3, ABB or Siemens or Taiwan DELTA converter
4, 18 years wearing parts
5, if you buy the system, Our engineer can go your place to help
install the machine, for first week, it's for free, no charge.
6, provide the installation video
7, select the single or whole unit oil separator according to your
requirements.
8. can Movable and Fixed
Note:
1. The heater can be electrical heating can also be steam heating.
And the heater can be canceled when separate the light fuel oil or
the oil does not require heating and the sump oil outlet can be
connected into the feed-throat.
2. First, please check the appearance of the package before
installation Second, open the package and check the complement of
machine, spare parts and consumable parts according to contract
list.
Offer area: one host , motor, a package of rotating drum (contain a
separator rotating in it),1 group if special tools (see the user
handbook, a group of wearing parts and spare parts (see the user
handbook)
3. Hanging the separator first. When the base in position Installed
balata damping pad on the each feet of the machine below, then
tightening the screw. Piping connected with separator must be used
hose..
4. The base of separator can be made of steel structure or pouring
the concrete, both should be solid, strong and surface smoothness,
and to minimize vibration and interference of the other machines.
5. To keep enough space for the maintenance when the machine is
installed
6. To make the axis of the motor to be parallel to the longitudinal
axis of the ship when the separator installed in the boat.
7. After the separator is already prepared, refer to chart 6, fix
the drum.
Main technical parameters
| No. | Model | Capacity (l/h) | Drum diameter (mm) | Drum speed | Motor Power (KW) | Discharge way | Separator factor | Weight(kg) | Size(mm*mm*mm) |
| 1 | KYDR203SD-23 | 1500 | 230 | 6930 | 2.2 | Manual | 6170 | 245 | 850*625*985 |
| 2 | KYDH204SD-23 | 2000 | 270 | 7200 | 4 | Automatic | 6950 | 550 | 865*645*1100 |
| 3 | KYDH206SD-23 | 3000 | 315 | 6500 | 5.5 | Automatic | 7000 | 650 | 900*600*1150 |
| 4 | KYDH207SD-23 | 4000 | 385 | 6500 | 7.5 | Automatic | 7500 | 750 | 1100*1050*1250 |
| 5 | KYDH209SD-23 | 5000 | 430 | 6000 | 11 | Automatic | 8050 | 900 | 1200*950*1400 |
| 6 | KYDH470/ZYDH470 | 8000 | 470 | 5800 | 18.5 | automatic | 8500 | 1100 |
1250*1000*1550 |
| 7 | KYDH211SD-23 | 10000 | 500 | 5500 | 18.5 | automatic | 8500 | 1200 | 1250*1100*1550 |
Separation conditions and actual productivity of mineral oil
| Item | Fuel oil | Lube oil |
| viscosity/(mm2/s | Distillate Fuel Oil | residual fuel oil | Brand oil | purified oil | Steam turbine oil |
| 1.9~5.5 | 5.5~24 | 60 | 80 | 120 | 180 | 380 | 460 | 600 | 100~120 | 61.2~74.8 |
| 40°C | 50°C | 40°C | 40°C |
Density/ (kg/mm3)(20°C) | <900 | 900~991 | 880~900 | <900 |
| separation temperature/°C | 20 | 40 | 75 | 80 | 90 | 98 | 80 | 75 |
The ratio of actual productivity and rated capacity % | 130 | 100 | 70~75 | 60~65 | 55~60 | 45~50 | 35~40 | 25~30 | 20~25 | 50~60 | 25~30 | 80~85 |
Note: the ratio of actual productivity and rated capacity is 100% |
Photos
